Home Pressure Washing a Building: 5 Tips to Get the Job Done Right
pressure washing
16 Jun

Pressure Washing a Building: 5 Tips to Get the Job Done Right

  • 0
  • Tony Williams

Summertime is here, and you’ve probably noticed a bit of algae, moss, and other unwanted organisms on your walls or on the side of your building. You might’ve already considered using a pressure washer to clean.  But what are some crucial things about pressure washing a building that you should know before taking it on? What’s a good piece of advice about pressure washing?

That’s what we’re here to look at today. Read on to find out more about the 5 key pressure washing tips to know before washing your building!

1. Using the Right Type of Pressure Washer

Pressure waters use either gas or electric pumps to create the pressure of the water flowing through the hose. Gas and electric pumps have different benefits that you should consider when choosing the pressure wash.

Gas pressure washers are a little more versatile and efficient. That means they not only clean faster, but you’ll have a wider selection when choosing the right washer for you.

They’re also cordless, so you won’t have to worry about needing an outlet to pressure wash. Spots on your home that are hard to get to without an outlet won’t be an issue here.

On the other hand. electric pressure washers are emissions-free and can be taken in and around the house. They also don’t require any oil changes, which is a convenience factor.

2. Find the Right Washer Size

Another tip when pressure washing a building is to get the right-sized washer for your job. A light-duty pressure washer works well for a deck or the front of a building.

If you’re cleaning something like a large parking lot, however, a medium-duty pressure washer might be better suited for the job. Those looking to clean concrete or tall walls should consider getting a heavy-duty washer.

3. Know the Best Nozzle

Pressure washer nozzles are color-coded to denote different angles. It’s important to know what each of these colors corresponds to.

Red nozzles create a water stream at a narrow, zero angle. Yellow nozzles spray at a 15-degree angle, making it ideal for concrete surfaces.

Green nozzles spray at a 25-degree angle and white nozzles use a 40-degree spray. These nozzles are meant for more gentle washes. That means you can use white nozzles for things like your windows and siding. 

4. Getting the Right Attachments

Sometimes you need a few specific attachments to get the job done. A surface cleaner, for example, lets you spray over a large surface area, such as a driveway or sidewalk.

Pressure washing brooms are similar to surface cleaners in that it helps you cover large cleaning areas. You can also use an expandable wand to help you reach taller or narrow spots.

5. Stay Safe

Maybe the most important tip we can give you is to practice proper pressure washer safety. Use both ear and eye protection, as washers are both loud and can send debris flying toward you.

Use both of your hands when operating a pressure washer. Never wash something that’s less than 18 inches away from you to avoid any damage to you or the surface.

Pressure Washing Tips for You

Pressure washing a building can be intimidating but there are plenty of steps you can take to get the job done right. Use this guide to pressure washing to help you understand everything you need to know about pressure washing.

Are you looking for expert exterior services in the Houston area? Contact us today and we’ll get you started on a solution!

Comments are closed.