Home 7 Common Pressure Washing Mistakes and How to Avoid Them
pressure washing mistakes
11 Feb

7 Common Pressure Washing Mistakes and How to Avoid Them

  • 0
  • Tony Williams

Is it your first time handling a pressure washer? If yes, there’s nothing wrong with that; there’s always a first time for everything. Before using it, research pressure washing mistakes to avoid and learn how to use the machine properly. Then test it by applying what you’ve learned to see whether it’s practical. This way, pressure washing becomes easier and helps you attain your exterior cleaning goals.

However, improper use of a pressure washer can be detrimental to your properties and put your life at risk. It can damage your home’s siding, remove sealant and paint and worsen concrete cracks. Even worse, it can leave you with severe pressure washer-related injuries.

But these and other risks associated with a pressure washer can be avoided if used correctly. Keep reading to learn more about the seven pressure washing mistakes and how to avoid them.

1. Forgetting to Angle the Spray

Your pressure washing goal is to lift the dirt from the surface to be easier to clean. Always approach your surface at an angle while cleaning it.

Avoid spraying directly at the dirty surface because you push the dirt deeper instead of eliminating it by doing so. This is crucial, especially when cleaning a porous material such as wool. Such materials absorb dirt easily, thus becoming difficult to wash.

If you want to remove all ground-in dirt or tough stains from your surface, move the spray head around to attack them in different directions. After that, angle the spray appropriately to scoop away the dirt.

If you forget spraying at an angle, chances are you end up with blowback dirt flying all over. If you don’t have your safety glasses on, they can land on your face, leaving it full of wet muck or get into your eyes.

2. Not Using Safety Equipment

Failing to use safety equipment when pressure washing is another common mistake that people make. This way, they expose themselves to risks associated with the pressure washers.

Pressure washers aren’t toys, even if they look like big squirt guns. They discharge a narrow stream of pressurized water that can easily slice through the flesh, leaving you with a severe wound. Even worse, the high pressure can drive dirt and contaminated water into the injury leading to severe infections.

For this reason, it’s good to wear clothes that cover your entire body during pressure washing. Don’t wear any clothes; go for the ones that can stand dirt and water. Also, wear quality noise-canceling headphones to protect your ears because pressure washers can be so loud.

Avoid wearing sandals or open-toe shoes when doing power washing, even if it’s during summer days. They won’t cover your feet with proper grip to prevent slip and fall. Don’t forget your safety goggles to protect your eyes from injuries and damage.

3. Using the Wrong Nozzle

Selecting the right pressure washer nozzle tip is crucial for safety and efficiency. If you’re not cautious, you may end up using the wrong nozzle because pressure washers have multiple nozzles. Choose the nozzle to use depending on the surface you want to clean.

Generally, you can wash different surfaces using a pressure washer. But you should do power washing appropriately because some materials are delicate and fragile. Adjust the water pressure depending on the material used in making the surface you’re cleaning.

The narrower the nozzle, the higher the pressure. For safer pressure washing, use a narrow nozzle when cleaning a delicate surface and a wide one when washing a hard surface.

4. Spraying Upward Against Siding

When pressure washing your home’s siding, avoid directing the spray upward into it. It has an opening at the bottom that allows any water to drain if it penetrates its barrier harmlessly. So spraying it from below pushes water into the gaps between your house and siding, which can be disastrous.

To avoid spraying upward against the siding, remain on the ground and use potent extension wands. Please don’t jump on a ladder to achieve this because it’s perilous. The kickback from the pressure washer can make you tumble on the ground and end up sustaining severe injuries.

Use extension wands with a slight curve or noticeable downward angle. They will help you direct the spray along the siding’s face or from top to bottom.

5. Excessive Pressure

When pressure washing, it can be tempting to use excessive pressure. This is because you might think using more pressure will ease and expedite the cleaning task. However, too much pressure from the pressure washing equipment can result in damages such as;

• worsening concrete cracks

• splitting wood

• paint or sealant removal

• injury to operators

To avoid all these damages, ensure to use proper pressure levels when doing commercial pressure washing. Using the correct pressure removes all the dirt and debris from the grimy surface and maintains it pristine.

Always keep the wand away from the surface if you realize your machine has a high PSI.

6. Hiring the Wrong Company

Hiring the wrong company to pressure wash your properties can result in hefty damages and expenses. They lack the skills and expertise required to do pressure washing correctly. Also, they may not have a clear understanding of what this task entails, so they might end up wasting much time and resources.

To hire the right pressure washing company, read online reviews from their website. Also, review their experience, reputation, and licensing.

Don’t be in a hurry to pick the service provider you’ll come across first. Comb through the available options and compare them to select the most suitable one. With the right company rest assured to enjoy the benefits of pressure washing.

7. Using Pressure Washer on Everything

Even with the lowest pressure and extreme care, not everything is good for pressure washing. For instance, most automobile paint jobs may endure high water pressure, but a thin clear coat cannot. Also, you can only clean the most fragile and delicate things like glassware using lower water pressure.

If you aren’t sure the material is suitable for pressure washing, always do a test run with small scrap material. Also, you can test in an area that won’t be noticeable or can be easily patched in case damage occurs. This way, you’ll be assured of subjecting the right materials to pressure washing.

These Are the Common Pressure Washing Mistakes to Avoid

Pressure washing is an excellent way of doing proper exterior cleaning. But to enjoy its maximum benefits, pressure washers should be handled properly. If they’re misused, they can be detrimental to properties and endanger lives.

For safe power washing, read the above pressure washing mistakes and avoid them.

Are you looking for the best pressure washing service? At Goldstone Exterior Services, we got you. We offer quality pressure washing services to bring new life to your property.

Contact us today for a free consultation. 

Comments are closed.